| 冷凝器系列 Condenser series |
| |
| ■ 冷凝器结构概况 |
风冷冷凝器是应用于空调冷冻及其他系统中的换热器，我厂采用优质翅片，加之先进的机械胀管工艺，使产品更加稳定，传热系数更高。风冷冷凝器主要由冷凝器片、轴流风机、框架等零部件组成。目前，我厂生产的产品有：侧出风冷凝器、顶出风冷凝器和V型顶出风冷凝器等产品，是与各型压缩机配套的理想产品。 |
| ■ Structure introduction |
| Air-cooled condenser is a kind of heat exchanger used in air-condition, refrigeration and other systems.Our products are stable and high efficient by using high quality fins and advance meachanical expand tubes techniques.Air-cooled condenser is made up of condensing fin, axial blower, and framework. At present our products include side-exhausted air-cooled condenser,top-exhausted air-cooled condenser and V-shape side-exhausted air-cooled condenser.They are perfect auxiliary products of all kinds of compressors. |
■ 产品型号种类规格表示方法 Model description |
| |
|
| |
■ 单风机侧出风风冷冷凝器 Single fan, side-exhausted air-cooled condenser |
| |
 |
 |
| 侧出风风冷冷凝器 Side-exhausted air -cooled condenser |
低噪声风冷冷凝器 low noise air-cooled condenser |
|
| 表01 单风机侧出风风冷冷凝器技术参数 Technical parameters of single-fan,side-exhausted air-cooled condenser |
| |
 |
| |
表02 低噪声风冷冷凝器技术参数 Technical parameters of low noise air-cooled condenser |
| |
 |
| |
■ 双风机侧出风风冷冷凝器 Double fan, side-exhausted type air-cooled condenser |
|
双风机侧出风风冷冷凝器 Double fan ,side-exhausted air-cooled condenser |
表03 双风机侧出风风冷冷凝器技术参数Technical parameters of double fan, side-exhausted air-cooled condenser |
| |
 |
| |
| 表04 四风机侧出风风冷冷凝器技术参数 Technical parameters of fourfold fan, side-exhausted air-cooled condenser |
| |
 |
| |
| ■ V型顶出风风冷冷凝器 V-shape top-exhausted type air-cooled condenser |
| |
|
V型顶出风风冷冷凝器 V-shape top-exhausted air-cooled condenser |
| |
| 表05 V型顶出风风冷冷凝器技术参数 Technical parameters of V-shape top-exhausted air-cooled condenser |
| |
 |
| |
■ 机房专用卧式、立式空调用风冷冷凝器 Horizontal and vertical air-cooled Specially used for machinery room condenser for air-conditioner |
| |
 |
 |
铝外壳顶出风风冷冷凝器
Aluminum casting, top-exhausted type air-cooled condenser |
顶出风风冷冷凝器
Top-exhausted type air-cooled condenser |
 |
 |
铝外壳顶出风风冷冷凝器
Aluminum casting, top-exhausted type air-cooled condenser |
侧出风风冷冷凝器
Tide-exhausted type air-cooled condenser |
|
| 表06 机房专用风冷冷凝器技术参数 Technical parameters of air-cooled condenser for machinery room condenser |
| |
 |
| |
| ■ 冷凝机组 Condenser unit |
|
| 风冷模块机组 Air-cooled module |
| 表07 风冷模块机组技术参数 Technical parameters of air-cooled module unit |
| |
 |
| |
| 表08 U型冷凝机组 Technical parameters of U-shape condenser unit |
| |
 |
| |
| ■ 风冷冷凝器的安装、使用与维护 |
1、 冷凝器在搬运及安装时不允许碰撞，以免造成泄露或损坏风机。
2、 风机转向应按扇叶箭头指示方向转动。
3、 试机时要先点动开关，待风机运转方向正确后，方可开机运转。
4、 冷凝器应保持清洁，以保证其传热性能。 |
| ■ Installation，application and maintenance of air-cooled condenser |
1、 No collision when move and install to avoid leakage and breakage of the
fan.
2、 The running direction is consistent with the direction of the arrow.
3、 Turn on the fan ,and then operate the machine,
4、 Keep clean to ensure the heat transfer performance. |
|
 |
U 型冷凝机组
U-shape condensing unit |
|
|
| |
| |
